+359 87 82 48 950WhatsApp ↗Viber ↗

Power & Free Wet Painting Line

Reghin, Romania

An integrated industrial finishing line connecting surface pretreatment, wet painting and oven stages through Power & Free material handling.

Power and Free wet painting line installed in Reghin, Romania
Project typeIndustrial wet painting line
HandlingPower & Free conveyor
LocationReghin, Romania
ProcessPretreatment, painting & ovens

Customer requirement

One controlled route through every finishing stage.

The production process required suspended workpieces to move through surface preparation, wet-paint application and thermal treatment without breaking the production flow. Each process unit and transfer point needed to operate as part of one coordinated line.

Workpiece suspended inside the wet paint booth in Reghin

Our solution

Integrated processing with flexible conveyor routing.

Atlas delivered a Power & Free wet painting line that connects the required treatment and finishing stages while allowing controlled workpiece movement throughout the installation.

  • Power & Free overhead conveyor system
  • Surface pretreatment booths
  • Industrial wet painting booth
  • Drying and process ovens
  • Air circulation and ventilation equipment
  • PLC-based line control

Technical configuration

A complete wet-paint process connected by one handling system.

The line architecture coordinates workpiece transport with surface preparation, paint application, thermal processing and production control.

01

Power & Free handling

The overhead conveyor routes suspended workpieces through the line and its transfer sections.

02

Surface pretreatment

Enclosed spray-treatment booths prepare workpiece surfaces before painting.

03

Wet painting

The enclosed booth provides a controlled environment for industrial wet-paint application.

04

Ovens & controls

Thermal process units, circulation equipment and PLC control coordinate the finishing cycle.

Atlas project scope

Atlas delivered a Power & Free wet painting line that connects the required treatment and finishing stages while allowing controlled workpiece movement throughout the installation.

Planning an industrial wet painting line?

Send us your workpiece data, process stages and target capacity.

Request a project proposal ↗
← All projects← Back to industrial paint shops