+359 87 82 48 950WhatsApp ↗Viber ↗

Commercial & Bus Spray Booths

Large-format painting and drying systems configured around the vehicles, production cycle and site conditions.

Request a project proposal ↗
Large-format FIRAT spray booth installation

Heavy-duty finishing

Give commercial vehicles and buses the space, airflow and heat capacity they require.

Commercial and bus spray booths are designed for trucks, commercial vehicles, coaches and buses where a standard automotive booth is simply not sufficient.

Each system combines heavy-duty access, balanced fresh-air and exhaust units, staged filtration and controlled drying. The configuration is engineered around vehicle dimensions, paint process, available utilities and the site layout.

Large-format access

Four-leaf entrance doors, optional shutters and heavy-duty floor systems for larger vehicles.

Controlled production

Fresh-air, heating and exhaust capacity selected for stable painting and drying conditions.

Flexible specification

Commercial and bus models can be adapted with heating, floor, lighting and control options.

Technical configuration

Standard heavy-duty booth platforms.

The FBK Commercial and FBK Bus ranges provide a defined starting point. Final dimensions, airflow and heating are matched to the vehicle fleet and the required production output.

COMMERCIAL VEHICLES

FBK 9000 & FBK 10000 Commercial

Painting and drying booths for vans, trucks and commercial vehicles, with a standard diesel-fired configuration and alternative heating packages.

Technical specificationFBK 9000
Commercial
FBK 10000
Commercial
Dimensions and access
Internal dimensions9000 (L) × 4500 (W) × 3970 (H) mm10000 (L) × 4500 (W) × 3970 (H) mm
External dimensions9200 (L) × 4600 (W) × 4600 (H) mm10200 (L) × 4600 (W) × 4600 (H) mm
Entrance / service door3600 (W) × 3865 (H) mm, 4 leaves / 800 × 2130 mm panic-bar door3600 (W) × 3865 (H) mm, 4 leaves / 800 × 2130 mm panic-bar door
Lighting and airflow
LED lightingTop: 14 × (4 × 16 W) · Side: 8 × (4 × 16 W)Top: 12 × (4 × 16 W) · Side: 8 × (4 × 16 W)
Fresh-air / exhaust fans2 × 5.5 kW / 2 × 5.5 kW2 × 7.5 kW / 2 × 7.5 kW
Airflow36,000 m³/h48,000 m³/h
Burner / heat exchangerDiesel / 280,000 kcal/hDiesel / 330,000 kcal/h
Painting / drying temperature20–25°C / max. 80°C20–25°C / max. 80°C
Filtration, floor and control
Filter stagesEU3 floor · EU4 pre-filtration · EU5 ceiling · EU3 unitEU3 floor · EU4 pre-filtration · EU5 ceiling · EU3 unit
FloorDirect floor mounting with 1 line of heavy-duty gratesDirect floor mounting with 1 line of heavy-duty grates
Electrical board25 kW · 380 V / 50 Hz · PLC · 5.5 in touch screen25 kW · 380 V / 50 Hz · PLC · 5.5 in touch screen
BUSES AND COACHES

FBK 15000 Bus

A 15 m platform for full-size buses and coaches, with high-volume air handling and access designed around heavy vehicle maintenance operations.

Technical specificationFBK 15000
Bus
Dimensions and access
Internal dimensions15000 (L) × 5000 (W) × 4970 (H) mm
External dimensions15000 (L) × 5100 (W) × 5600 (H) mm
Entrance / service doors3800 (W) × 4200 (H) mm, 4 leaves / 2 × 800 × 2130 mm panic-bar doors
Lighting and airflow
LED lightingTop: 22 × (4 × 16 W) · Side: 13 × (4 × 16 W)
Fresh-air / exhaust fans4 × 5.5 kW / 4 × 5.5 kW
Airflow2 × 36,000 m³/h
Burner / heat exchangerDiesel / 2 × 280,000 kcal/h
Painting / drying temperature20–25°C / max. 80°C
Filtration, floor and control
Filter stagesEU3 floor · EU4 pre-filtration · EU5 ceiling
FloorDirect floor mounting with 1 line of heavy-duty grates
Electrical board50 kW · 380 V / 50 Hz · PLC · 5.5 in touch screen

Configuration options

Adapt the booth to the vehicle, building and energy source.

01

Heating & recovery

  • Natural gas burner
  • Electric heating
  • Hot water or steam
  • Double-pipe heat exchanger
  • Heat recuperator unit
02

Floor & access

  • Additional grate lines
  • One-side or two-side suction
  • Openable roof sections
  • Roller shutters, middle doors or main exit doors
03

Controls & safety

  • ATEX-certified lighting
  • Inverter-drive fan control
  • Soft-starter drives
  • Pressure display and PLC control

Technical values shown are for the standard platform. The final design is determined by the vehicle dimensions, paint process and site conditions.

Related systems

Complete the commercial vehicle finishing area.

Send us the vehicle dimensions, production capacity and painting process.

Request a project proposal ↗